(Courriels de diversion: <cirages@impulses-sinuosites.com> <tronquerez@phonologue-reactualiserez.com> <deguerpiraient@soulevent-dilapideriez.com> <privilegiant@electoralistes-melodiques.com> <grossiere@ruinees-collets.com> <medailles@sous-marinier-rongeant.com> <dorlotes@propagent-noueras.com> <elevons@assembla-econduise.com> <confondrai@devętiraient-seches.com> <galaxie@pouliner-raboterais.com> )


> > Oui j'ai installe avec succes openSUSE10.3b3 sur le hda (/boot, swap,
> > /, et /home), et un RAID5 /local sur sda1, sdb1, et sdc1. Et ca a
> > l'air de marcher le RAID est la apres le boot.
> et tu monte /local? quand tu fais "df" ca te dit quoi?

desktop-opensuse:/ # mdadm --detail /dev/md0
/dev/md0:
        Version : 01.00.03
  Creation Time : Sun Sep 16 11:23:11 2007
     Raid Level : raid5
     Array Size : 258598144 (246.62 GiB 264.80 GB)
  Used Dev Size : 258598144 (123.31 GiB 132.40 GB)
   Raid Devices : 3
  Total Devices : 3
Preferred Minor : 0
    Persistence : Superblock is persistent

  Intent Bitmap : Internal

    Update Time : Thu Sep 20 21:13:46 2007
          State : active
 Active Devices : 3
Working Devices : 3
 Failed Devices : 0
  Spare Devices : 0

         Layout : left-symmetric
     Chunk Size : 128K

           Name : 0
           UUID : d3c4616c:0c44ed6c:7920b03e:0f1979fa
         Events : 24

    Number   Major   Minor   RaidDevice State
       0       8       20        0      active sync   /dev/sdb4
       1       8       36        1      active sync   /dev/sdc4
       3       8       52        2      active sync   /dev/sdd4

desktop-opensuse:/ # df
Sys. de fich.        1K-blocs       Occupé Disponible Capacité Monté sur
/dev/sda2             20641788   3203728  16389420  17% /
udev                    517284       148    517136   1% /dev
/dev/sda3            131119488   1455936 123003004   2% /home
/dev/md0             254540636    191712 241419020   1% /local

desktop-opensuse:/ # mount
/dev/sda2 on / type ext3 (rw,acl,user_xattr)
proc on /proc type proc (rw)
sysfs on /sys type sysfs (rw)
debugfs on /sys/kernel/debug type debugfs (rw)
udev on /dev type tmpfs (rw)
devpts on /dev/pts type devpts (rw,mode=0620,gid=5)
/dev/sda3 on /home type ext3 (rw,acl,user_xattr)
/dev/md0 on /local type ext3 (rw,acl,user_xattr)
securityfs on /sys/kernel/security type securityfs (rw)

et le resultat du dmesg:
enfin le best of
donc la c'est le probleme d'APIC d'avec les autres distributions.
Mais la, ca semble etre resolu :{D
ENABLING IO-APIC IRQs
..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
..MP-BIOS bug: 8254 timer not connected to IO-APIC
...trying to set up timer (IRQ0) through the 8259A ...  failed.
...trying to set up timer as Virtual Wire IRQ... failed.
...trying to set up timer as ExtINT IRQ... works.

et la...ben on dirait bien que ca marche non?

device-mapper: ioctl: 4.11.0-ioctl (2006-10-12) initialised: dm-devel@redhat.commd: md0 stopped.
md: bind<sdc4>
md: bind<sdd4>
md: bind<sdb4>
raid5: automatically using best checksumming function: pIII_sse
   pIII_sse  :  6197.000 MB/sec
raid5: using function: pIII_sse (6197.000 MB/sec)
raid6: int32x1    743 MB/s
raid6: int32x2    779 MB/s
raid6: int32x4    703 MB/s
raid6: int32x8    539 MB/s
raid6: mmxx1     1585 MB/s
raid6: mmxx2     2871 MB/s
raid6: sse1x1    1527 MB/s
raid6: sse1x2    2404 MB/s
raid6: sse2x1    2659 MB/s
raid6: sse2x2    3563 MB/s
raid6: using algorithm sse2x2 (3563 MB/s)
md: raid6 personality registered for level 6
md: raid5 personality registered for level 5
md: raid4 personality registered for level 4
raid5: device sdb4 operational as raid disk 0
raid5: device sdd4 operational as raid disk 2
raid5: device sdc4 operational as raid disk 1
raid5: allocated 3163kB for md0
raid5: raid level 5 set md0 active with 3 out of 3 devices, algorithm 2
RAID5 conf printout:
 --- rd:3 wd:3
 disk 0, o:1, dev:sdb4
 disk 1, o:1, dev:sdc4
 disk 2, o:1, dev:sdd4
md0: bitmap initialized from disk: read 16/16 pages, set 2 bits, status: 0
created bitmap (247 pages) for device md0
loop: module loaded
kjournald starting.  Commit interval 5 seconds
EXT3 FS on sda3, internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting.  Commit interval 5 seconds
EXT3 FS on md0, internal journal
EXT3-fs: mounted filesystem with ordered data mode.

Si oui...c'est bon non?

Voila voila...
Stephane.
KDE c'est pas mal. Faudra que je me lance dans l'exploration des wm.
A Samedi.

--------------------------------------------------------------------
Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>