[Linux-31] disk dur HS ?
Joyce MARKOLL
joyce.markoll at gmx.fr
Jeu 5 Fév 16:24:07 CET 2015
Bonjour,
Essaie aussi de voir ce que dit whdd en l'installant dans/depuis un
live-cd ?
https://wiki.debian-facile.org/doc:materiel:disques-durs:recuperation-de-donnees-disque-endomage?s%5B%5D=whdd
et quelques fichiers en plus à ce sujet, ici
http://phillw.net/isos/bento-ubuntu-remix/Misc/
Ce sont les 5 fichiers en bas de la liste (c'est de là que le tutoriel
chez debian-facile a été rédigé).
Bonne fin de journée,
Joyce
Le jeudi 05 février 2015 à 16:04 +0100, Christophe a écrit :
> Bonjour,
> Je pense que le disk dur est hors service, selon les valeurs ci-dessous.
>
> Ce qui m'embête le plus est de savoir si ce disk dur à reçu un choc !
>
> Du fait de la valeur Free_Fall_Sensor qui est: 4
> Pourrait-on afirmer qu'il y a eu choc ?
>
> (Arghff 659 heures de vol l'engin seulement !!)
>
> j'ai tenté d'installer un nouveau windows et j'ai un message d'erreur
> (code erreur: 80800000)
>
> Je copie le rapport complet ci-dessous
> Merci pour vos retours
>
> Christophe
>
> smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-23-generic] (local build)
> Copyright (C) 2002-11 by Bruce Allen, http://smartmontools.sourceforge.net
>
> === START OF INFORMATION SECTION ===
> Model Family: Seagate Momentus 7200.4
> Device Model: ST9500420AS
> Serial Number: xxxxxxxxxxxx
> LU WWN Device Id: 5 000c50 039046ec2
> Firmware Version: D005SDM1
> User Capacity: 500,107,862,016 bytes [500 GB]
> Sector Size: 512 bytes logical/physical
> Device is: In smartctl database [for details use: -P show]
> ATA Version is: 8
> ATA Standard is: ATA-8-ACS revision 4
> Local Time is: Thu Feb 5 14:11:14 2015 UTC
> SMART support is: Available - device has SMART capability.
> SMART support is: Enabled
>
> === START OF READ SMART DATA SECTION ===
> SMART overall-health self-assessment test result: PASSED
>
> General SMART Values:
> Offline data collection status: (0x82) Offline data collection activity
> was completed without error.
> Auto Offline Data Collection: Enabled.
> Self-test execution status: ( 121) The previous self-test completed
> having
> the read element of the test failed.
> Total time to complete Offline
> data collection: ( 0) seconds.
> Offline data collection
> capabilities: (0x7b) SMART execute Offline immediate.
> Auto Offline data collection on/off support.
> Suspend Offline collection upon new
> command.
> Offline surface scan supported.
> Self-test supported.
> Conveyance Self-test supported.
> Selective Self-test supported.
> SMART capabilities: (0x0003) Saves SMART data before entering
> power-saving mode.
> Supports SMART auto save timer.
> Error logging capability: (0x01) Error logging supported.
> General Purpose Logging supported.
> Short self-test routine
> recommended polling time: ( 2) minutes.
> Extended self-test routine
> recommended polling time: ( 108) minutes.
> Conveyance self-test routine
> recommended polling time: ( 3) minutes.
> SCT capabilities: (0x103f) SCT Status supported.
> SCT Error Recovery Control supported.
> SCT Feature Control supported.
> SCT Data Table supported.
>
> SMART Attributes Data Structure revision number: 10
> Vendor Specific SMART Attributes with Thresholds:
> ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
> WHEN_FAILED RAW_VALUE
> 1 Raw_Read_Error_Rate 0x000f 095 078 006 Pre-fail
> Always - 214247491
> 3 Spin_Up_Time 0x0003 100 099 085 Pre-fail
> Always - 0
> 4 Start_Stop_Count 0x0032 100 100 020 Old_age
> Always - 483
> 5 Reallocated_Sector_Ct 0x0033 054 054 036 Pre-fail
> Always - 961
> 7 Seek_Error_Rate 0x000f 072 060 030 Pre-fail
> Always - 14803624
> 9 Power_On_Hours 0x0032 100 100 000 Old_age
> Always - 659
> 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail
> Always - 0
> 12 Power_Cycle_Count 0x0032 100 037 020 Old_age
> Always - 471
> 184 End-to-End_Error 0x0032 100 100 099 Old_age
> Always - 0
> 187 Reported_Uncorrect 0x0032 001 001 000 Old_age
> Always - 24115
> 188 Command_Timeout 0x0032 100 098 000 Old_age
> Always - 12885098502
> 189 High_Fly_Writes 0x003a 100 100 000 Old_age
> Always - 0
> 190 Airflow_Temperature_Cel 0x0022 062 051 045 Old_age
> Always - 38 (Min/Max 34/38)
> 191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age
> Always - 20
> 192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age
> Always - 34
> 193 Load_Cycle_Count 0x0032 090 090 000 Old_age
> Always - 20014
> 194 Temperature_Celsius 0x0022 038 049 000 Old_age
> Always - 38 (0 6 0 0)
> 195 Hardware_ECC_Recovered 0x001a 053 042 000 Old_age
> Always - 214247491
> 197 Current_Pending_Sector 0x0012 100 100 000 Old_age
> Always - 40
> 198 Offline_Uncorrectable 0x0010 100 100 000 Old_age
> Offline - 40
> 199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age
> Always - 5
> 240 Head_Flying_Hours 0x0000 100 253 000 Old_age
> Offline - 272979531399662
> 241 Total_LBAs_Written 0x0000 100 253 000 Old_age
> Offline - 3923657144
> 242 Total_LBAs_Read 0x0000 100 253 000 Old_age
> Offline - 1730549053
> 254 Free_Fall_Sensor 0x0032 001 001 000 Old_age
> Always - 4
>
> SMART Error Log Version: 1
> ATA Error Count: 24147 (device log contains only the most recent five
> errors)
> CR = Command Register [HEX]
> FR = Features Register [HEX]
> SC = Sector Count Register [HEX]
> SN = Sector Number Register [HEX]
> CL = Cylinder Low Register [HEX]
> CH = Cylinder High Register [HEX]
> DH = Device/Head Register [HEX]
> DC = Device Command Register [HEX]
> ER = Error register [HEX]
> ST = Status register [HEX]
> Powered_Up_Time is measured from power on, and printed as
> DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
> SS=sec, and sss=millisec. It "wraps" after 49.710 days.
>
> Error 24147 occurred at disk power-on lifetime: 655 hours (27 days + 7
> hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 60 00 00 3f c6 ab 40 00 01:18:18.130 READ FPDMA QUEUED
> ec 00 00 00 00 00 00 00 01:18:18.068 IDENTIFY DEVICE
> 00 00 00 00 00 00 00 ff 01:18:17.944 NOP [Abort queued commands]
> ec 00 00 00 00 00 00 00 01:18:17.881 IDENTIFY DEVICE
> 00 00 00 00 00 00 00 ff 01:18:17.757 NOP [Abort queued commands]
>
> Error 24146 occurred at disk power-on lifetime: 655 hours (27 days + 7
> hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 60 00 00 3f c6 ab 40 00 01:17:10.524 READ FPDMA QUEUED
> 60 00 08 6f c6 ab 40 00 01:17:09.937 READ FPDMA QUEUED
> ec 00 00 00 00 00 00 00 01:17:09.875 IDENTIFY DEVICE
> 00 00 00 00 00 00 00 ff 01:17:09.751 NOP [Abort queued commands]
> 61 00 30 0f a1 5d 40 00 01:16:05.129 WRITE FPDMA QUEUED
>
> Error 24145 occurred at disk power-on lifetime: 655 hours (27 days + 7
> hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 60 00 00 3f c6 ab 40 00 01:16:02.144 READ FPDMA QUEUED
> 60 00 00 3f 7d 07 41 00 01:16:02.118 READ FPDMA QUEUED
> ec 00 00 00 00 00 00 00 01:16:02.056 IDENTIFY DEVICE
> 00 00 00 00 00 00 00 ff 01:16:01.932 NOP [Abort queued commands]
> ec 00 00 00 00 00 00 00 01:16:01.868 IDENTIFY DEVICE
>
> Error 24144 occurred at disk power-on lifetime: 655 hours (27 days + 7
> hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 60 00 00 3f c6 ab 40 00 01:14:54.157 READ FPDMA QUEUED
> 60 00 00 3f c4 72 40 00 01:14:54.155 READ FPDMA QUEUED
> 60 00 00 3f bd 3b 40 00 01:14:54.148 READ FPDMA QUEUED
> 60 00 00 3f b3 0e 40 00 01:14:54.135 READ FPDMA QUEUED
> 60 00 00 3f d4 0a 40 00 01:14:54.125 READ FPDMA QUEUED
>
> Error 24143 occurred at disk power-on lifetime: 655 hours (27 days + 7
> hours)
> When the command that caused the error occurred, the device was active or
> idle.
>
> After command completion occurred, registers were:
> ER ST SC SN CL CH DH
> -- -- -- -- -- -- --
> 40 51 00 8f 63 ac 00 Error: UNC at LBA = 0x00ac638f = 11297679
>
> Commands leading to the command that caused the error were:
> CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
> -- -- -- -- -- -- -- -- ---------------- --------------------
> 60 00 80 7f 63 ac 40 00 01:04:54.206 READ FPDMA QUEUED
> 61 00 18 ff e7 5e 40 00 01:04:54.197 WRITE FPDMA QUEUED
> 61 00 00 9f 6f 51 41 00 01:04:54.194 WRITE FPDMA QUEUED
> 61 00 00 9f 6b 51 41 00 01:04:54.192 WRITE FPDMA QUEUED
> 61 00 08 4f e4 5b 40 00 01:04:54.163 WRITE FPDMA QUEUED
>
> SMART Self-test log structure revision number 1
> Num Test_Description Status Remaining
> LifeTime(hours) LBA_of_first_error
> # 1 Short offline Completed: read failure 90%
> 657 11297679
> # 2 Extended offline Completed: read failure 90%
> 657 11297679
> # 3 Extended offline Completed: read failure 90%
> 656 11297679
> # 4 Short offline Completed without error 00%
> 0 -
>
> SMART Selective self-test log data structure revision number 1
> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
> 1 0 0 Not_testing
> 2 0 0 Not_testing
> 3 0 0 Not_testing
> 4 0 0 Not_testing
> 5 0 0 Not_testing
> Selective self-test flags (0x0):
> After scanning selected spans, do NOT read-scan remainder of disk.
> If Selective self-test is pending on power-up, resume after 0 minute delay.
>
> --
> Debian Lenny user 2.6.26/Xorg 7.0.2 & KDE 3.5.10
> http://www.debian.org # http://fr.wikipedia.org/wiki/Obsolescence
> https://soutien.laquadrature.net/
> http://gnutux.free.fr # Il faut dire GNU/Linux :) # www.culte.org
> _______________________________________________
> Linux-31 mailing list
> Linux-31 at culte.org
> http://culte.org/mailman/listinfo/linux-31
Plus d'informations sur la liste de diffusion Linux-31