Re: DD usb

["Nicolas Figaro" <pookicat@gmail.com>]

question indiscrète, ne faut-il pas une alimentation externe sur le pc
de bureau pour ce dd ?

Le dmesg montre que le disque n'est pas reconnu.

on peut avoir un dmesg | egrep -iv "usb|sda" du portable ?

n f

2008/1/31, momo <grelaud.maurice@wanadoo.fr>:>
>
> jdd sur free a écrit :
> >
> > heu.. on est au 2.6 depuis pas mal de temps :-?
> >
> oui c'est vrai, erreur de frappe, je suis un peu brouillon quand je
> comprends pas quelque chose et j'écris des bêtises, je crois avoir lu
> que avec le noyau 2.6 on ne pouvait pas lire du ntfs, ce que j'ai
> vérifié avec celui d'un collègues de travail, son disk externe _usb est
> en ntfs, je ne peux ni écrire ni lire sur son disc
> >
> > regarde ce que dit dmesg ou /var/log/messages quand tu branche le
> > disque usb
> rien,  et donc j'ai redémarré avec le disk branché
>
> momo@debian:~$ dmesg> Linux version 2.6.18-4-486 (Debian 2.6.18.dfsg.1-12etch2)
> (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian> 4.1.1-21)) #1 Wed May 9 22:23:40 UTC 2007
> BIOS-provided physical RAM map:
>  BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
>  BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
>  BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
>  BIOS-e820: 0000000000100000 - 000000000fff0000 (usable)
>  BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data)
>  BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS)
>  BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
>  BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
>  BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
> 255MB LOWMEM available.
> found SMP MP-table at 000fb930
> On node 0 totalpages: 65520
>   DMA zone: 4096 pages, LIFO batch:0
>   Normal zone: 61424 pages, LIFO batch:15
> DMI 2.3 present.
> ACPI: RSDP (v000 AMI                                   ) @ 0x000fa940
> ACPI: RSDT (v001 AMIINT VIA_K7   0x00000010 MSFT 0x00000097) @ 0x0fff0000
> ACPI: FADT (v001 AMIINT VIA_K7   0x00000011 MSFT 0x00000097) @ 0x0fff0030
> ACPI: MADT (v001 AMIINT VIA_K7   0x00000009 MSFT 0x00000097) @ 0x0fff00c0
> ACPI: DSDT (v001    VIA   VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000
> ACPI: PM-Timer IO Port: 0x808
> ACPI: Local APIC address 0xfee00000
> ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
> Processor #0 6:8 APIC version 16
> ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
> IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23
> ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
> ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
> ACPI: IRQ0 used by override.
> ACPI: IRQ2 used by override.
> ACPI: IRQ9 used by override.
> Enabling APIC mode:  Flat.  Using 1 I/O APICs
> Using ACPI (MADT) for SMP configuration information
> Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000)
> Detected 1200.154 MHz processor.
> Built 1 zonelists.  Total pages: 65520
> Kernel command line: root=/dev/hda1 ro 26
> mapped APIC to ffffd000 (fee00000)
> mapped IOAPIC to ffffc000 (fec00000)
> Enabling fast FPU save and restore... done.
> Enabling unmasked SIMD FPU exception support... done.
> Initializing CPU#0
> PID hash table entries: 1024 (order: 10, 4096 bytes)
> Console: colour VGA+ 80x25
> Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
> Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
> Memory: 252368k/262080k available (1502k kernel code, 9120k reserved,
> 601k data, 256k init, 0k highmem)
> Checking if this processor honours the WP bit even in supervisor mode... Ok.
> Calibrating delay using timer specific routine.. 2402.36 BogoMIPS
> (lpj=4804730)
> Security Framework v1.0.0 initialized
> SELinux:  Disabled at boot.
> Capability LSM initialized
> Mount-cache hash table entries: 512
> CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000
> 00000000 00000000 00000000
> CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000
> 00000000 00000000 00000000
> CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
> CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
> CPU: L2 Cache: 64K (64 bytes/line)
> CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000
> 00000000 00000000
> Compat vDSO mapped to ffffe000.
> CPU: AMD Duron(tm)  stepping 01
> Checking 'hlt' instruction... OK.
> ACPI: Core revision 20060707
> ENABLING IO-APIC IRQs
> ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1
> checking if image is initramfs... it is
> Freeing initrd memory: 4255k freed
> NET: Registered protocol family 16
> EISA bus registered
> ACPI: bus type pci registered
> PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
> PCI: Using configuration type 1
> Setting up standard PCI resources
> ACPI: Interpreter enabled
> ACPI: Using IOAPIC for interrupt routing
> ACPI: PCI Root Bridge [PCI0] (0000:00)
> PCI: Probing PCI hardware (bus 00)
> PCI quirk: region 0800-087f claimed by vt8235 PM
> PCI quirk: region 0400-040f claimed by vt8235 SMB
> Boot video device is 0000:01:00.0
> ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
> ACPI: Power Resource [URP1] (off)
> ACPI: Power Resource [URP2] (off)
> ACPI: Power Resource [FDDP] (off)
> ACPI: Power Resource [LPTP] (off)
> ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
> ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15)
> ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
> Linux Plug and Play Support v0.97 (c) Adam Belay
> pnp: PnP ACPI init
> pnp: PnP ACPI: found 12 devices
> PnPBIOS: Disabled by ACPI PNP
> PCI: Using ACPI for IRQ routing
> PCI: If a device doesn't work, try "pci=routeirq".  If it helps, post a
> report
> PCI: Bridge: 0000:00:01.0
>   IO window: c000-cfff
>   MEM window: dfe00000-dfefffff
>   PREFETCH window: cfd00000-dfcfffff
> PCI: Setting latency timer of device 0000:00:01.0 to 64
> NET: Registered protocol family 2
> IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
> TCP established hash table entries: 8192 (order: 3, 32768 bytes)
> TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
> TCP: Hash tables configured (established 8192 bind 4096)
> TCP reno registered
> audit: initializing netlink socket (disabled)
> audit(1201811564.984:1): initialized
> VFS: Disk quotas dquot_6.5.1
> Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
> Initializing Cryptographic API
> io scheduler noop registered
> io scheduler anticipatory registered
> io scheduler deadline registered
> io scheduler cfq registered (default)
> isapnp: Scanning for PnP cards...
> isapnp: No Plug & Play device found
> Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
> serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
> 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
> RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize
> PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
> serio: i8042 AUX port at 0x60,0x64 irq 12
> serio: i8042 KBD port at 0x60,0x64 irq 1
> mice: PS/2 mouse device common for all mice
> EISA: Probing bus 0 at eisa.0
> EISA: Detected 0 cards.
> TCP bic registered
> NET: Registered protocol family 1
> NET: Registered protocol family 17
> NET: Registered protocol family 8
> NET: Registered protocol family 20
> Using IPI Shortcut mode
> ACPI: (supports S0 S1 S4 S5)
> Time: tsc clocksource has been installed.
> Freeing unused kernel memory: 256k freed
> input: AT Translated Set 2 keyboard as /class/input/input0
> usbcore: registered new driver usbfs
> usbcore: registered new driver hub
> USB Universal Host Controller Interface driver v3.0
> ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169
> PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 9
> uhci_hcd 0000:00:10.0: UHCI Host Controller
> uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
> uhci_hcd 0000:00:10.0: irq 169, io base 0x0000e400
> usb usb1: configuration #1 chosen from 1 choice
> hub 1-0:1.0: USB hub found
> hub 1-0:1.0: 2 ports detected
> via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker
> ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169
> PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 9
> uhci_hcd 0000:00:10.1: UHCI Host Controller
> uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
> uhci_hcd 0000:00:10.1: irq 169, io base 0x0000e800
> usb usb2: configuration #1 chosen from 1 choice
> hub 2-0:1.0: USB hub found
> hub 2-0:1.0: 2 ports detected
> Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
> ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
> ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169
> PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 9
> uhci_hcd 0000:00:10.2: UHCI Host Controller
> uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
> uhci_hcd 0000:00:10.2: irq 169, io base 0x0000ec00
> usb usb3: configuration #1 chosen from 1 choice
> hub 3-0:1.0: USB hub found
> hub 3-0:1.0: 2 ports detected
> ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169
> PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9
> ehci_hcd 0000:00:10.3: EHCI Host Controller
> ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
> ehci_hcd 0000:00:10.3: irq 169, io mem 0xdfffff00
> ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
> usb usb4: configuration #1 chosen from 1 choice
> hub 4-0:1.0: USB hub found
> hub 4-0:1.0: 6 ports detected
> ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177
> eth0: VIA Rhine II at 0x1dc00, 00:0c:76:99:50:40, IRQ 177.
> eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1.
> VP_IDE: IDE controller at PCI slot 0000:00:11.1
> ACPI: Unable to derive IRQ for device 0000:00:11.1
> ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI
> PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15
> VP_IDE: chipset revision 6
> VP_IDE: not 100% native mode: will probe irqs later
> VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
>     ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
>     ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
> Probing IDE interface ide0...
> hda: Maxtor 6Y080P0, ATA DISK drive
> ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
> Probing IDE interface ide1...
> hdc: HL-DT-STDVDRRW GWA-4161B, ATAPI CD/DVD-ROM drive
> hdd: IDE/ATAPI CD-ROM 50XS, ATAPI CD/DVD-ROM drive
> ide1 at 0x170-0x177,0x376 on irq 15
> hda: max request size: 128KiB
> hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(33)
> hda: cache flushes supported
>  hda: hda1 hda2 < hda5 hda6 >
> hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33)
> Uniform CD-ROM driver Revision: 3.20
> hdd: ATAPI 11X CD-ROM drive, 128kB Cache, UDMA(33)
> Attempting manual resume
> kjournald starting.  Commit interval 5 seconds
> EXT3-fs: mounted filesystem with ordered data mode.
> pci_hotplug: PCI Hot Plug PCI Core version: 0.5
> shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
> irda_init()
> NET: Registered protocol family 23
> input: PC Speaker as /class/input/input1
> Linux agpgart interface v0.101 (c) Dave Jones
> agpgart: Detected VIA KT400/KT400A/KT600 chipset
> agpgart: AGP aperture is 128M @ 0xe0000000
> Real Time Clock Driver v1.12ac
> Floppy drive(s): fd0 is 1.44M
> FDC 0 is a post-1991 82077
> parport: PnPBIOS parport detected.
> parport0: PC-style at 0x378 (0x778), irq 7, dma 3
> [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
> ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185
> PCI: Setting latency timer of device 0000:00:11.5 to 64
> input: ImExPS/2 Generic Explorer Mouse as /class/input/input2
> ts: Compaq touchscreen protocol output
> kobject_add failed for audio with -EEXIST, don't try to register things
> with the same name in the same directory.
>  [<c01a9ddf>] kobject_add+0x12e/0x154
>  [<c0201c6b>] class_device_add+0x9b/0x3a6
>  [<c01a9b89>] kobject_get+0xf/0x13
>  [<c0201ffd>] class_device_create+0x77/0x96
>  [<d08e209d>] oss_init+0x9d/0x127 [sound]
>  [<c01299cc>] sys_init_module+0x13a9/0x14ea
>  [<c01029dd>] sysenter_past_esp+0x56/0x79
> Adding 755012k swap on /dev/hda5.  Priority:-1 extents:1 across:755012k
> EXT3 FS on hda1, internal journal
> loop: loaded (max 8 devices)
> device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised:
> dm-devel@redhat.com> kjournald starting.  Commit interval 5 seconds
> EXT3 FS on hda6, internal journal
> EXT3-fs: mounted filesystem with ordered data mode.
> eth0: link up, 100Mbps, full-duplex, lpa 0x45E1
> ACPI: Power Button (FF) [PWRF]
> ACPI: Power Button (CM) [PWRB]
> ACPI: Sleep Button (CM) [SLPB]
> NET: Registered protocol family 10
> lo: Disabled Privacy Extensions
> IPv6 over IPv4 tunneling driver
> [drm] Initialized drm 1.0.1 20051102
> [drm] Initialized radeon 1.25.0 20060524 on minor 0
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000
> mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000
> agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> agpgart: Device is in legacy mode, falling back to 2.x
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
> [drm] Setting GART location based on new memory map
> [drm] writeback test succeeded in 1 usecs
> eth0: no IPv6 routers present
> agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> agpgart: Device is in legacy mode, falling back to 2.x
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
> agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
> agpgart: Device is in legacy mode, falling back to 2.x
> agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode
> agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode
>
>
> -
> ===========================
> GNU/Linux - Debian/etch 2.6.18-4.
> http://www.debian.org/ == :a)
> http://fr.wikipedia.org/wiki/Debian
>
>
>
> --------------------------------------------------------------------
> Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>
>
>

--------------------------------------------------------------------
Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>