(Courriels de diversion: <pleurerai@redoutable-planifies.com> <ennuierait@impudique-reflechirons.com> <directifs@gladiateurs-beurre.com> <retabliras@blaspheme-freezers.com> <drop@branchements-degringolant.com> <tairait@forcats-deteindre.com> <renonciation@quantifierent-reevalue.com> <idealisera@detellerais-picorent.com> <tartufe@cueillerons-chevalerie.com> <enhardisse@pope-propagandiste.com> )
jdd sur free a écrit :
oui c'est vrai, erreur de frappe, je suis un peu brouillon quand je comprends pas quelque chose et j'écris des bêtises, je crois avoir lu que avec le noyau 2.6 on ne pouvait pas lire du ntfs, ce que j'ai vérifié avec celui d'un collègues de travail, son disk externe _usb est en ntfs, je ne peux ni écrire ni lire sur son discheu.. on est au 2.6 depuis pas mal de temps :-?
regarde ce que dit dmesg ou /var/log/messages quand tu branche le disque usb
rien, et donc j'ai redémarré avec le disk branché momo@debian:~$ dmesgLinux version 2.6.18-4-486 (Debian 2.6.18.dfsg.1-12etch2) (dannf@debian.org) (gcc version 4.1.2 20061115 (prerelease) (Debian 4.1.1-21)) #1 Wed May 9 22:23:40 UTC 2007
BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. found SMP MP-table at 000fb930 On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:0 Normal zone: 61424 pages, LIFO batch:15 DMI 2.3 present. ACPI: RSDP (v000 AMI ) @ 0x000fa940 ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x0fff0000 ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x0fff0030 ACPI: MADT (v001 AMIINT VIA_K7 0x00000009 MSFT 0x00000097) @ 0x0fff00c0 ACPI: DSDT (v001 VIA VIA_K7 0x00001000 MSFT 0x0100000d) @ 0x00000000 ACPI: PM-Timer IO Port: 0x808 ACPI: Local APIC address 0xfee00000 ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) Processor #0 6:8 APIC version 16 ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 2, version 3, address 0xfec00000, GSI 0-23 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level) ACPI: IRQ0 used by override. ACPI: IRQ2 used by override. ACPI: IRQ9 used by override. Enabling APIC mode: Flat. Using 1 I/O APICs Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at 20000000 (gap: 10000000:eec00000) Detected 1200.154 MHz processor. Built 1 zonelists. Total pages: 65520 Kernel command line: root=/dev/hda1 ro 26 mapped APIC to ffffd000 (fee00000) mapped IOAPIC to ffffc000 (fec00000) Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Initializing CPU#0 PID hash table entries: 1024 (order: 10, 4096 bytes) Console: colour VGA+ 80x25 Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)Memory: 252368k/262080k available (1502k kernel code, 9120k reserved, 601k data, 256k init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.Calibrating delay using timer specific routine.. 2402.36 BogoMIPS (lpj=4804730)
Security Framework v1.0.0 initialized SELinux: Disabled at boot. Capability LSM initialized Mount-cache hash table entries: 512CPU: After generic identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000 CPU: After vendor identify, caps: 0383fbff c1c3fbff 00000000 00000000 00000000 00000000 00000000
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) CPU: L2 Cache: 64K (64 bytes/line)CPU: After all inits, caps: 0383fbff c1c3fbff 00000000 00000420 00000000 00000000 00000000
Compat vDSO mapped to ffffe000. CPU: AMD Duron(tm) stepping 01 Checking 'hlt' instruction... OK. ACPI: Core revision 20060707 ENABLING IO-APIC IRQs ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 checking if image is initramfs... it is Freeing initrd memory: 4255k freed NET: Registered protocol family 16 EISA bus registered ACPI: bus type pci registered PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1 PCI: Using configuration type 1 Setting up standard PCI resources ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) PCI quirk: region 0800-087f claimed by vt8235 PM PCI quirk: region 0400-040f claimed by vt8235 SMB Boot video device is 0000:01:00.0 ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] ACPI: Power Resource [URP1] (off) ACPI: Power Resource [URP2] (off) ACPI: Power Resource [FDDP] (off) ACPI: Power Resource [LPTP] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 *10 11 12 14 15) ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15) ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 *11 12 14 15) ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15) Linux Plug and Play Support v0.97 (c) Adam Belay pnp: PnP ACPI init pnp: PnP ACPI: found 12 devices PnPBIOS: Disabled by ACPI PNP PCI: Using ACPI for IRQ routingPCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
PCI: Bridge: 0000:00:01.0 IO window: c000-cfff MEM window: dfe00000-dfefffff PREFETCH window: cfd00000-dfcfffff PCI: Setting latency timer of device 0000:00:01.0 to 64 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 3, 32768 bytes) TCP bind hash table entries: 4096 (order: 2, 16384 bytes) TCP: Hash tables configured (established 8192 bind 4096) TCP reno registered audit: initializing netlink socket (disabled) audit(1201811564.984:1): initialized VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) Initializing Cryptographic API io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) isapnp: Scanning for PnP cards... isapnp: No Plug & Play device found Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A 00:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A RAMDISK driver initialized: 16 RAM disks of 8192K size 1024 blocksize PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 mice: PS/2 mouse device common for all mice EISA: Probing bus 0 at eisa.0 EISA: Detected 0 cards. TCP bic registered NET: Registered protocol family 1 NET: Registered protocol family 17 NET: Registered protocol family 8 NET: Registered protocol family 20 Using IPI Shortcut mode ACPI: (supports S0 S1 S4 S5) Time: tsc clocksource has been installed. Freeing unused kernel memory: 256k freed input: AT Translated Set 2 keyboard as /class/input/input0 usbcore: registered new driver usbfs usbcore: registered new driver hub USB Universal Host Controller Interface driver v3.0 ACPI: PCI Interrupt 0000:00:10.0[A] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.0, from 10 to 9 uhci_hcd 0000:00:10.0: UHCI Host Controller uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:10.0: irq 169, io base 0x0000e400 usb usb1: configuration #1 chosen from 1 choice hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected via-rhine.c:v1.10-LK1.4.1 July-24-2006 Written by Donald Becker ACPI: PCI Interrupt 0000:00:10.1[B] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.1, from 5 to 9 uhci_hcd 0000:00:10.1: UHCI Host Controller uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:10.1: irq 169, io base 0x0000e800 usb usb2: configuration #1 chosen from 1 choice hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ACPI: PCI Interrupt 0000:00:10.2[C] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.2, from 11 to 9 uhci_hcd 0000:00:10.2: UHCI Host Controller uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3 uhci_hcd 0000:00:10.2: irq 169, io base 0x0000ec00 usb usb3: configuration #1 chosen from 1 choice hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected ACPI: PCI Interrupt 0000:00:10.3[D] -> GSI 21 (level, low) -> IRQ 169 PCI: VIA IRQ fixup for 0000:00:10.3, from 10 to 9 ehci_hcd 0000:00:10.3: EHCI Host Controller ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4 ehci_hcd 0000:00:10.3: irq 169, io mem 0xdfffff00 ehci_hcd 0000:00:10.3: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 usb usb4: configuration #1 chosen from 1 choice hub 4-0:1.0: USB hub found hub 4-0:1.0: 6 ports detected ACPI: PCI Interrupt 0000:00:12.0[A] -> GSI 23 (level, low) -> IRQ 177 eth0: VIA Rhine II at 0x1dc00, 00:0c:76:99:50:40, IRQ 177. eth0: MII PHY found at address 1, status 0x786d advertising 05e1 Link 45e1. VP_IDE: IDE controller at PCI slot 0000:00:11.1 ACPI: Unable to derive IRQ for device 0000:00:11.1 ACPI: PCI Interrupt 0000:00:11.1[A]: no GSI PCI: VIA IRQ fixup for 0000:00:11.1, from 255 to 15 VP_IDE: chipset revision 6 VP_IDE: not 100% native mode: will probe irqs later VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1 ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA Probing IDE interface ide0... hda: Maxtor 6Y080P0, ATA DISK drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 Probing IDE interface ide1... hdc: HL-DT-STDVDRRW GWA-4161B, ATAPI CD/DVD-ROM drive hdd: IDE/ATAPI CD-ROM 50XS, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=65535/16/63, UDMA(33) hda: cache flushes supported hda: hda1 hda2 < hda5 hda6 > hdc: ATAPI 40X DVD-ROM DVD-R CD-R/RW drive, 2048kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 hdd: ATAPI 11X CD-ROM drive, 128kB Cache, UDMA(33) Attempting manual resume kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 irda_init() NET: Registered protocol family 23 input: PC Speaker as /class/input/input1 Linux agpgart interface v0.101 (c) Dave Jones agpgart: Detected VIA KT400/KT400A/KT600 chipset agpgart: AGP aperture is 128M @ 0xe0000000 Real Time Clock Driver v1.12ac Floppy drive(s): fd0 is 1.44M FDC 0 is a post-1991 82077 parport: PnPBIOS parport detected.parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,EPP,ECP,DMA]
ACPI: PCI Interrupt 0000:00:11.5[C] -> GSI 22 (level, low) -> IRQ 185 PCI: Setting latency timer of device 0000:00:11.5 to 64 input: ImExPS/2 Generic Explorer Mouse as /class/input/input2 ts: Compaq touchscreen protocol outputkobject_add failed for audio with -EEXIST, don't try to register things with the same name in the same directory.
[<c01a9ddf>] kobject_add+0x12e/0x154 [<c0201c6b>] class_device_add+0x9b/0x3a6 [<c01a9b89>] kobject_get+0xf/0x13 [<c0201ffd>] class_device_create+0x77/0x96 [<d08e209d>] oss_init+0x9d/0x127 [sound] [<c01299cc>] sys_init_module+0x13a9/0x14ea [<c01029dd>] sysenter_past_esp+0x56/0x79 Adding 755012k swap on /dev/hda5. Priority:-1 extents:1 across:755012k EXT3 FS on hda1, internal journal loop: loaded (max 8 devices)device-mapper: ioctl: 4.7.0-ioctl (2006-06-24) initialised: dm-devel@redhat.com
kjournald starting. Commit interval 5 seconds EXT3 FS on hda6, internal journal EXT3-fs: mounted filesystem with ordered data mode. eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 ACPI: Power Button (FF) [PWRF] ACPI: Power Button (CM) [PWRB] ACPI: Sleep Button (CM) [SLPB] NET: Registered protocol family 10 lo: Disabled Privacy Extensions IPv6 over IPv4 tunneling driver [drm] Initialized drm 1.0.1 20051102 [drm] Initialized radeon 1.25.0 20060524 on minor 0 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000 mtrr: 0xd0000000,0x8000000 overlaps existing 0xd0000000,0x2000000 agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode [drm] Setting GART location based on new memory map [drm] writeback test succeeded in 1 usecs eth0: no IPv6 routers present agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0. agpgart: Device is in legacy mode, falling back to 2.x agpgart: Putting AGP V2 device at 0000:00:00.0 into 1x mode agpgart: Putting AGP V2 device at 0000:01:00.0 into 1x mode - =========================== GNU/Linux - Debian/etch 2.6.18-4. http://www.debian.org/ == :a) http://fr.wikipedia.org/wiki/Debian -------------------------------------------------------------------- Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>