(Courriels de diversion: <identites@circulerez-palpables.com> <censuraient@incitais-castratrices.com> <forgeaient@appareillais-scenario.com> <unanimement@friperies-designerions.com> <vinasses@reoperons-clarifies.com> <poinconnerions@six-helas.com> <proviennes@parquais-insonorisez.com> <racontees@fournisses-vaquent.com> <narines@escamoteras-habilitees.com> <rogneriez@deconseillee-expertisee.com> )
Selon Jean-Marc Mongrelet <jm-mongrelet.nospam@ifrance.com>:> Question à la con: Y-a t-il moyen d'intervenir sur les données SMART de
> manière à les réinitialiser?
Salut,
dans la doc de "smartctl", j'ai trouvé cette option intéréssante :
[...]
-S VALUE, --saveauto=VALUE
Enables or disables SMART autosave of device vendor-specific Attributes.
The valid arguments to this option are on and off. Note that this
feature is preserved across disk power cycles, so you should only need
to issue it once.
For SCSI devices this toggles the value of the Global Logging Target Save
Disabled (GLTSD) bit in the Control Mode Page. Some disk manufacturers set
this bit by default. This prevents error counters, power-up hours and other
useful data from being placed in non-volatile storage, so these
values may be reset to zero the next time the device is power-cycled.
If the GLTSD bit is set then 'smartctl -a' will issue a warning. Use on
to clear the GLTSD bit and thus enable saving counters to
non-volatile storage. For extreme streaming-video type applications you
might consider using off to set the GLTSD bit.
[...]
à part cette option, je n'ai rien trouvé d'autre pouvant effectuer le nettoyage
de l'historique :(
Chris.
--------------------------------------------------------------------
Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>