[Linux-31] disk dur HS ou pas ?

[Christophe VANHOUTTE]

Bonjour,
j'ai mes machines virtuelles qui ne fonctionnent plus, alors que tout
été ok jusqu'a présent!
Il y a quelquessemaines nous en avions parlé au local ...

Message suivant:

Message from syslogd at xxx at Feb  1 13:05:53 ...
 kernel:[  118.637845] general protection fault: 0000 [#1] SMP

Message from syslogd at xxx at Feb  1 13:05:53 ...
 kernel:[  118.637849] last sysfs file: /sys/devices/system/cpu/cpu1/online

Message from syslogd at xxx at Feb  1 13:05:53 ...
 kernel:[  118.637941] Stack:

Message from syslogd at xxx at Feb  1 13:05:53 ...
 kernel:[  118.637951] Call Trace:

Message from syslogd at xxxx at Feb  1 13:05:53 ...
 kernel:[  118.638005] Code: 00 0f 20 d8 4a 89 84 02 c0 06 00 00 0f 20
e0 4a 89 84 02 c8 06 00 00 48 83 e0 70 42 8b 8c 02 b8 0a 00 00 23 4a
20 09 c8 0b 42 24 <0f> 22 e0 42 8b 84 02 a0 0a 00 00 83 e0 04 0d 3b 00
00 80 0f 22


=== START OF READ SMART DATA SECTION
=== SMART Attributes Data Structure revision number: 16 Vendor
Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME          FLAG     VALUE WORST THRESH TYPE
UPDATED  WHEN_FAILED RAW_VALUE
  1 Raw_Read_Error_Rate     0x002f   200   200   051    Pre-fail
Always       -       0
  3 Spin_Up_Time            0x0027   183   177   021    Pre-fail
Always       -       1841
  4 Start_Stop_Count        0x0032   100   100   000    Old_age Always
      -       475
  5 Reallocated_Sector_Ct   0x0033   200   200   140    Pre-fail
Always       -       0
  7 Seek_Error_Rate         0x002f   200   200   051    Pre-fail
Always       -       0
  9 Power_On_Hours          0x0032   098   098   000    Old_age Always
      -       1762
 10 Spin_Retry_Count        0x0033   100   100   051    Pre-fail
Always       -       0
 11 Calibration_Retry_Count 0x0032   100   100   000    Old_age Always
      -       0
 12 Power_Cycle_Count       0x0032   100   100   000    Old_age Always
      -       448
183 Runtime_Bad_Block       0x0032   100   100   000    Old_age Always
      -       0
184 End-to-End_Error        0x0033   100   100   097    Pre-fail
Always       -       0
187 Reported_Uncorrect      0x0032   100   100   000    Old_age Always
      -       0
188 Command_Timeout         0x0032   100   089   000    Old_age Always
      -       30
190 Airflow_Temperature_Cel 0x0022   062   051   040    Old_age Always
      -       38
191 G-Sense_Error_Rate      0x0032   095   095   000    Old_age Always
      -       5
192 Power-Off_Retract_Count 0x0032   200   200   000    Old_age Always
      -       44
193 Load_Cycle_Count        0x0032   192   192   000    Old_age Always
      -       26197
194 Temperature_Celsius     0x0022   109   098   000    Old_age Always
      -       38
196 Reallocated_Event_Count 0x0032   200   200   000    Old_age Always
      -       0
197 Current_Pending_Sector  0x0032   200   200   000    Old_age Always
      -       0
198 Offline_Uncorrectable   0x0030   100   253   000    Old_age
Offline      -       0
199 UDMA_CRC_Error_Count    0x0032   200   200   000    Old_age Always
      -       0
200 Multi_Zone_Error_Rate   0x0009   200   200   051    Pre-fail
Offline      -       0

Je ne vois que: " G-sense error rate"   qui pourrait poser problème
(électromécaniques) !?

Où faire d'autres recherches ?


Christophe





-- 
Debian Lenny user 2.6.26/Xorg 7.0.2 & KDE 3.5.10
http://www.debian.org # http://fr.wikipedia.org/wiki/Obsolescence
http://gnutux.free.fr # Il faut dire GNU/Linux :) # www.culte.org
--
GNU/Linux : May the Force be with you !