(Courriels de diversion: <geodesique@nommions-flechage.com> <arriere-plans@tolerantes-plants.com> <instrument@fletrisses-cadette.com> <fermer@descendre-cartonnes.com> <recommence@decollerait-demettrions.com> <mangee@banni-debrayages.com> <enragiez@empocher-departie.com> <bafouillions@theoriserent-enduits.com> <jarret@deboucheraient-couvertes.com> <relaterais@contribua-criards.com> )
Bonjour, voici un problème qui m'inquiète. J'ai une carte mère asus A7V8X avec son et réseau intégrés. J'ai un message qui m'inquiète au démarrage de debian-sarge noyau 2.4 une succession de lignes comme celles-ci : ---------------------------------------------------------------- usb-uhci.c: $Revision: 1.275 $ time 11:31:10 Jan 20 2005 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 3 for device 00:10.0 IRQ routing conflict for 00:10.0, have irq 5, want irq 3 IRQ routing conflict for 00:10.1, have irq 5, want irq 3 IRQ routing conflict for 00:10.2, have irq 5, want irq 3 IRQ routing conflict for 00:10.3, have irq 5, want irq 3 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 3 for device 00:10.1 IRQ routing conflict for 00:10.0, have irq 5, want irq 3 IRQ routing conflict for 00:10.1, have irq 5, want irq 3 IRQ routing conflict for 00:10.2, have irq 5, want irq 3 IRQ routing conflict for 00:10.3, have irq 5, want irq 3 usb-uhci.c: USB UHCI at I/O 0xd000, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 3 for device 00:10.2 IRQ routing conflict for 00:10.0, have irq 5, want irq 3 IRQ routing conflict for 00:10.1, have irq 5, want irq 3 IRQ routing conflict for 00:10.2, have irq 5, want irq 3 IRQ routing conflict for 00:10.3, have irq 5, want irq 3 usb-uhci.c: USB UHCI at I/O 0xb800, IRQ 5 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 3 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver PCI: Found IRQ 3 for device 00:10.3 IRQ routing conflict for 00:10.0, have irq 5, want irq 3 IRQ routing conflict for 00:10.1, have irq 5, want irq 3 IRQ routing conflict for 00:10.2, have irq 5, want irq 3 IRQ routing conflict for 00:10.3, have irq 5, want irq 3 ehci_hcd 00:10.3: VIA Technologies, Inc. USB 2.0 ehci_hcd 00:10.3: irq 5, pci mem f891c000 usb.c: new USB bus registered, assigned bus number 4 ehci_hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Dec-29/2.4 hub.c: USB hub found hub.c: 6 ports detected hub.c: connect-debounce failed, port 2 disabled PCI: Found IRQ 11 for device 01:00.0 NVRM: loading NVIDIA Linux x86 NVIDIA Kernel Module 1.0-7167 Fri Feb 25 09:08:22 PST 2005 hub.c: new USB device 00:10.3-4, assigned address 2 usb.c: USB device not accepting new address=2 (error=-71) PCI: Found IRQ 4 for device 00:11.5 IRQ routing conflict for 00:11.5, have irq 9, want irq 4 PCI: Setting latency timer of device 00:11.5 to 64 hub.c: new USB device 00:10.3-4, assigned address 3 usb.c: USB device not accepting new address=3 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 4 usb.c: USB device not accepting new address=4 (error=-71) irda_init() uhci.c: USB Universal Host Controller Interface driver v1.1 hub.c: new USB device 00:10.3-4, assigned address 5 usb.c: USB device not accepting new address=5 (error=-71) 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) pci_hotplug: PCI Hot Plug PCI Core version: 0.5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x1001 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x1001 hub.c: new USB device 00:10.3-4, assigned address 6 usb.c: USB device not accepting new address=6 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 7 usb.c: USB device not accepting new address=7 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 8 usb.c: USB device not accepting new address=8 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 9 usb.c: USB device not accepting new address=9 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 10 usb.c: USB device not accepting new address=10 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 11 usb.c: USB device not accepting new address=11 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 12 usb.c: USB device not accepting new address=12 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 13 usb.c: USB device not accepting new address=13 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 14 usb.c: USB device not accepting new address=14 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 15 usb.c: USB device not accepting new address=15 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 16 usb.c: USB device not accepting new address=16 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 17 usb.c: USB device not accepting new address=17 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 18 usb.c: USB device not accepting new address=18 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 19 usb.c: USB device not accepting new address=19 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 20 usb.c: USB device not accepting new address=20 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 21 usb.c: USB device not accepting new address=21 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 22 usb.c: USB device not accepting new address=22 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 23 usb.c: USB device not accepting new address=23 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 24 usb.c: USB device not accepting new address=24 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 25 usb.c: USB device not accepting new address=25 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 26 usb.c: USB device not accepting new address=26 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 27 usb.c: USB device not accepting new address=27 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 28 usb.c: USB device not accepting new address=28 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 29 usb.c: USB device not accepting new address=29 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 30 usb.c: USB device not accepting new address=30 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 31 usb.c: USB device not accepting new address=31 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 32 usb.c: USB device not accepting new address=32 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 33 usb.c: USB device not accepting new address=33 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 34 usb.c: USB device not accepting new address=34 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 35 usb.c: USB device not accepting new address=35 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 36 usb.c: USB device not accepting new address=36 (error=-71) hub.c: new USB device 00:10.3-4, assigned address 37 ------------------------------------------------------------------ et ainsi, il y en a beaucoup. Debian démarre quand même, quelque fois, non, le boot reste bloqué à ce niveau là. Mes périphériques branchés sur un hub usb fonctionnent : souris, tablette wacom, imprimante, et quand j'y branche mon apn, ça fonctionne aussi à chaud. Mes ces messages ne me plaisent pas. Avec un noyau 2.6, je ne les ai plus, du moins le problème y est mais est résolu plus vite, semble-t-il.. Le hic avec le noyau 2.6, c'est que ma tablette wacom devient inutilisable (avec debian, avec suse et noyau 2.6, ça fonctionne) et aussi et cela avec n'importe quelle distribution à noyau 2.6 (testées : sarge, suse9.2, mandrake 10.0, mepis 3.6) mon graveur ide-samsung devient inaccessible au bout d'une demi journée de marche de linux. Je suis obligé de rset pour avoir accès au graveur. Pour revenir à l'usb, c'est quoi cette (erreur=71) ? Bref, si quelqu'un a une idée du problème usb, merci. -- serge CARRÈRE merci de m'avoir lu À bientôt http://www.carrere.homelinux.com -------------------------------------------------------------------- Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>