(Courriels de diversion: <assechais@strictes-roderais.com> <agraferait@happeriez-crepitait.com> <premediterent@veineux-contact.com> <entrecroiseraient@quadruple-orienterait.com> <detruis@habillee-cafardeux.com> <emporter@rassemblent-cancerologues.com> <tropiques@bananeraie-rencontrais.com> <breveta@fil-corniche.com> <voulu@violee-axeraient.com> <recriant@godelureaux-cumulus.com> )
bonjour,
Je ne suis pas nouveau sur la liste mais j'ai cesser d'utliser mon ordi
depuis quelques temps faute d'un acces a edf et au telephone.
J'ai la mandrake 9.1 de chez linux cd, une carte mere msi kt400a et un
atlhon xp 2200+. pour la carte grphique c'est une ati radeon 9600 pro.
Le pilote fglrx semble bien installé.
voici aussi lsmod:[root@localhost fab]# lsmodModule Size Used by Tainted: P
ppp_deflate 4408 1 (autoclean)
zlib_deflate 21144 0 (autoclean) [ppp_deflate]
bsd_comp 5336 0 (autoclean)
ppp_async 9216 1 (autoclean)
ppp_generic 24060 3 (autoclean) [ppp_deflate bsd_comp
ppp_async]
slhc 6564 1 (autoclean) [ppp_generic]
sg 34636 0 (autoclean)
isofs 27988 1 (autoclean)
zlib_inflate 21156 0 (autoclean) [ppp_deflate isofs]
udf 90464 0 (autoclean)
appletalk 25700 1 (autoclean)
ipx 21252 1 (autoclean)
hsfbasic2 115660 2 (autoclean)
hsfserial 26804 2 (autoclean)
hsfengine 1113836 0 (autoclean) [hsfserial]
hsfosspec 34264 1 (autoclean) [hsfbasic2 hsfserial
hsfengine]
lp 8096 0
parport_pc 25096 1
parport 34176 1 [lp parport_pc]
fglrx 190408 0
snd-seq-oss 31104 0 (unused)
snd-seq-midi-event 5640 0 [snd-seq-oss]
snd-seq 42608 2 [snd-seq-oss snd-seq-midi-event]
snd-pcm-oss 43556 0
snd-mixer-oss 14488 0 [snd-pcm-oss]
snd-via82xx 14092 1
snd-ac97-codec 40160 0 [snd-via82xx]
snd-pcm 77536 1 [snd-pcm-oss snd-via82xx]
snd-timer 18376 0 [snd-seq snd-pcm]
snd-mpu401-uart 4396 0 [snd-via82xx]
snd-rawmidi 17600 0 [snd-mpu401-uart]
snd-seq-device 5832 0 [snd-seq-oss snd-seq snd-rawmidi]
snd-page-alloc 7732 0 [snd-via82xx snd-pcm]
snd 40868 0 [snd-seq-oss snd-seq-midi-event
snd-seq snd-pcm-oss snd-mixer-oss snd-via82xx snd-ac97-codec snd-pcm
snd-timer snd-mpu401-uart snd-rawmidi snd-seq-device]
soundcore 6276 0 [snd]
af_packet 14952 0 (autoclean)
floppy 55132 0
via-rhine 15056 1 (autoclean)
mii 3832 0 (autoclean) [via-rhine]
nls_iso8859-15 4092 2 (autoclean)
nls_cp850 4316 1 (autoclean)
vfat 11820 1 (autoclean)
fat 37944 0 (autoclean) [vfat]
supermount 15296 4 (autoclean)
sr_mod 16920 0
ide-cd 33856 1
cdrom 31648 0 [sr_mod ide-cd]
ide-scsi 11280 0
scanner 10904 0
sd_mod 13100 0
scsimon 9280 0 (unused)
usb-storage 72952 0
scsi_mod 103284 6 [sg sr_mod ide-scsi sd_mod scsimon
usb-storage]
ehci-hcd 18568 0 (unused)
usb-uhci 24652 0 (unused)
usbcore 72992 1 [scanner usb-storage ehci-hcd usb-uhci]
rtc 8060 0 (autoclean)
ext3 59916 5
jbd 38972 5 [ext3]$
voici les logs dmesg:
[root@localhost fab]# dmesg8 bytes)
Inode cache hash table entries: 32768 (order: 6, 262144 bytes)
Mount cache hash table entries: 512 (order: 0, 4096 bytes)
Buffer-cache hash table entries: 32768 (order: 5, 131072 bytes)
Page-cache hash table entries: 131072 (order: 7, 524288 bytes)
CPU: CLK_CTL MSR was 6003d22f. Reprogramming to 2003d22f
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: After generic, caps: 0383fbff c1c3fbff 00000000 00000000
CPU: Common caps: 0383fbff c1c3fbff 00000000 00000000
CPU: AMD Athlon(tm) XP 2200+ stepping 01
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000080
ESR value after enabling vector: 00000000
ENABLING IO-APIC IRQs
Setting 2 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 2 ... ok.
init IO_APIC IRQs
IO-APIC (apicid-pin) 2-0, 2-5, 2-10, 2-11, 2-17, 2-18, 2-20 not connected.
..TIMER: vector=0x31 pin1=2 pin2=0
number of MP IRQ sources: 21.
number of IO-APIC #2 registers: 24.
testing the IO APIC.......................
IO APIC #2......
.... register #00: 02000000
....... : physical APIC id: 02
.... register #01: 00178003
....... : max redirection entries: 0017
....... : PRQ implemented: 1
....... : IO APIC version: 0003
An unexpected IO-APIC was found. If this kernel release is less than
three months old please report this to linux-smp@vger.kernel.org.... IRQ redirection table:
NR Log Phy Mask Trig IRR Pol Stat Dest Deli Vect:
00 000 00 1 0 0 0 0 0 0 00
01 001 01 0 0 0 0 0 1 1 39
02 001 01 0 0 0 0 0 1 1 31
03 001 01 0 0 0 0 0 1 1 41
04 001 01 0 0 0 0 0 1 1 49
05 000 00 1 0 0 0 0 0 0 00
06 001 01 0 0 0 0 0 1 1 51
07 001 01 0 0 0 0 0 1 1 59
08 001 01 0 0 0 0 0 1 1 61
09 001 01 0 0 0 0 0 1 1 69
0a 000 00 1 0 0 0 0 0 0 00
0b 000 00 1 0 0 0 0 0 0 00
0c 001 01 0 0 0 0 0 1 1 71
0d 001 01 0 0 0 0 0 1 1 79
0e 001 01 0 0 0 0 0 1 1 81
0f 001 01 0 0 0 0 0 1 1 89
10 001 01 1 1 0 1 0 1 1 91
11 000 00 1 0 0 0 0 0 0 00
12 000 00 1 0 0 0 0 0 0 00
13 001 01 1 1 0 1 0 1 1 99
14 000 00 1 0 0 0 0 0 0 00
15 001 01 1 1 0 1 0 1 1 A1
16 001 01 1 1 0 1 0 1 1 A9
17 001 01 1 1 0 1 0 1 1 B1
IRQ to pin mappings:
IRQ0 -> 0:2
IRQ1 -> 0:1
IRQ3 -> 0:3
IRQ4 -> 0:4
IRQ6 -> 0:6
IRQ7 -> 0:7
IRQ8 -> 0:8
IRQ9 -> 0:9
IRQ12 -> 0:12
IRQ13 -> 0:13
IRQ14 -> 0:14
IRQ15 -> 0:15
IRQ16 -> 0:16
IRQ19 -> 0:19
IRQ21 -> 0:21
IRQ22 -> 0:22
IRQ23 -> 0:23
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1800.0293 MHz.
..... host bus clock speed is 266.6710 MHz.
cpu: 0, clocks: 2666710, slice: 1333355
CPU0<T0:2666704,T1:1333344,D:5,S:1333355,C:2666710>
mtrr: v1.40 (20010327) Richard Gooch (rgooch@atnf.csiro.au)mtrr: detected mtrr type: Intel
ACPI: Subsystem revision 20030122
ACPI: Disabled via command line (acpi=off)
PCI: PCI BIOS revision 2.10 entry at 0xfdaf1, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: ACPI tables contain no PCI IRQ routing entries
PCI: Probing PCI hardware (bus 00)
PCI: Using IRQ router default [1106/3177] at 00:11.0
PCI->APIC IRQ transform: (B0,I8,P0) -> 19
PCI->APIC IRQ transform: (B0,I16,P0) -> 21
PCI->APIC IRQ transform: (B0,I16,P1) -> 21
PCI->APIC IRQ transform: (B0,I16,P2) -> 21
PCI->APIC IRQ transform: (B0,I16,P3) -> 21
PCI->APIC IRQ transform: (B0,I17,P0) -> 22
PCI->APIC IRQ transform: (B0,I17,P2) -> 22
PCI->APIC IRQ transform: (B0,I18,P0) -> 23
PCI->APIC IRQ transform: (B1,I0,P0) -> 16
PCI: Via IRQ fixup for 00:10.0, from 11 to 5
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16)
Starting kswapd
VFS: Disk quotas vdquot_6.5.1
devfs: v1.12c (20020818) Richard Gooch (rgooch@atnf.csiro.au)devfs: boot_options: 0x1
vesafb: framebuffer at 0xc0000000, mapped to 0xe0800000, size 131072k
vesafb: mode is 800x600x16, linelength=1600, pages=135
vesafb: protected mode interface info at c000:574f
vesafb: scrolling: redraw
vesafb: directcolor: size=0:5:6:5, shift=0:11:5:0
Looking for splash picture.... found (800x600, 25593 bytes).
Console: switching to colour frame buffer device 80x16
fb0: VESA VGA frame buffer device
pty: 256 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with HUB-6 MANY_PORTS MULTIPORT
SHARE_IRQ SERIAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
RAMDISK driver initialized: 16 RAM disks of 32000K size 1024 blocksize
Uniform Multi-Platform E-IDE driver Revision: 7.00beta-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 00:11.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:DMA
hda: QUANTUM FIREBALLP AS20.5, ATA DISK drive
hdb: TOSHIBA DVD-ROM SD-M1212, ATAPI CD/DVD-ROM drive
hda: DMA disabled
blk: queue c03cb420, I/O limit 4095Mb (mask 0xffffffff)
hdb: DMA disabled
hdc: Maxtor 6Y080P0, ATA DISK drive
hdd: PCRW404, ATAPI CD/DVD-ROM drive
hdc: DMA disabled
blk: queue c03cb86c, I/O limit 4095Mb (mask 0xffffffff)
hdd: DMA disabled
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: host protected area => 1
hda: 40132503 sectors (20548 MB) w/1902KiB Cache, CHS=2498/255/63, UDMA(100)
hdc: host protected area => 1
hdc: 160086528 sectors (81964 MB) w/7936KiB Cache, CHS=158816/16/63,
UDMA(133)
Partition check:
/dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 p9 >
/dev/ide/host0/bus1/target0/lun0: p1 p2
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 108k freed
VFS: Mounted root (ext2 filesystem).
Mounted devfs on /dev
Journalled Block Device driver loaded
kjournald starting. Commit interval 5 seconds
EXT3-fs: mounted filesystem with ordered data mode.
Mounted devfs on /dev
Freeing unused kernel memory: 136k freed
Real Time Clock Driver v1.10e
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
usb-uhci.c: $Revision: 1.275 $ time 15:32:56 Mar 14 2003
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: USB UHCI at I/O 0xe800, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe400, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 2
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 21
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 3
hub.c: USB hub found
hub.c: 2 ports detected
usb-uhci.c: v1.275:USB Universal Host Controller Interface driver
ehci-hcd 00:10.3: VIA Technologies, Inc. USB 2.0
ehci-hcd 00:10.3: irq 21, pci mem e895bf00
usb.c: new USB bus registered, assigned bus number 4
ehci-hcd 00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2002-Dec-20
hub.c: USB hub found
hub.c: 6 ports detected
usbdevfs: remount parameter error
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,5), internal journal
Adding Swap: 401584k swap-space (priority -1)
Adding Swap: 409208k swap-space (priority -2)
hub.c: connect-debounce failed, port 1 disabled
hub.c: new USB device 00:10.0-1, assigned address 2
usb.c: USB device 2 (vend/prod 0x59b/0x32) is not claimed by any active
driver.
hub.c: new USB device 00:10.0-2, assigned address 3
usb.c: USB device 3 (vend/prod 0x3f0/0x605) is not claimed by any active
driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 1514
Vendor: IOMEGA Model: ZIP 250 Rev: 90.V
Type: Direct-Access ANSI SCSI revision: 02
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 2
USB Mass Storage support registered.
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
sda : READ CAPACITY failed.
sda : status = 1, message = 00, host = 0, driver = 08
Current sd00:00: sense key Not Ready
Additional sense indicates Logical unit not ready,initializing cmd. required
sda : block size assumed to be 512 bytes, disk size 1GB.
/dev/scsi/host0/bus0/target0/lun0: I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 2097144
I/O error: dev 08:00, sector 0
I/O error: dev 08:00, sector 0
ldm_validate_partition_table(): Disk read failed.
I/O error: dev 08:00, sector 0
unable to read partition table
usb.c: registered new driver usbscanner
scanner.c: 0.4.10:USB Scanner Driver
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
Vendor: PHILIPS Model: PCRW404 Rev: 1.06
Type: CD-ROM ANSI SCSI revision: 02
hdb: ATAPI 32X DVD-ROM drive, 256kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.12
Attached scsi CD-ROM sr0 at scsi1, channel 0, id 0, lun 0
sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide1(22,2), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
MSDOS FS: IO charset iso8859-15
MSDOS FS: Using codepage 850
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,7), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,9), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
kjournald starting. Commit interval 5 seconds
EXT3 FS 2.4-0.9.19, 19 August 2002 on ide0(3,8), internal journal
EXT3-fs: mounted filesystem with ordered data mode.
via-rhine.c:v1.10-LK1.1.15 November-22-2002 Written by Donald Becker
http://www.scyld.com/network/via-rhine.html
eth0: VIA VT6102 Rhine-II at 0xd800, 00:0c:76:3b:d2:57, IRQ 23.
eth0: MII PHY found at address 1, status 0x7849 advertising 05e1 Link 0000.
VFS: Disk change detected on device 08:00
SCSI device sda: 196608 512-byte hdwr sectors (101 MB)
usb-uhci.c: interrupt, status 3, frame# 1460
sda: Write Protect is off
/dev/scsi/host0/bus0/target0/lun0: p4
inserting floppy driver for 2.4.21-0.13mdk
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
PCI: Setting latency timer of device 00:11.5 to 64
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
[fglrx] module loaded - fglrx 3.2.8 [Sep 21 2003] on minor 0
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Linux agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected Via Apollo Pro KT400 chipset
agpgart: unable to determine aperture size.
Fire GL built-in AGP-support
Based on agpgart interface v0.99 (c) Jeff Hartmann
agpgart: Maximum main memory to use for agp memory: 439M
agpgart: Detected a Via Apollo KT400 chipset in AGP v2 compat mode at
00:00.0
agpgart: Detected Via Apollo KT400 chipset
agpgart: unable to determine aperture size.
[fglrx:firegl_unlock] *ERROR* Process 1400 using kernel context 0
parport0: PC-style at 0x378 (0x778) [PCSPP,TRISTATE,EPP]
parport0: irq 7 detected
parport0: faking semi-colon
parport0: Printer, HEWLETT-PACKARD DESKJET 710C
lp0: using parport0 (polling).
Splash status on console 0 changed to off
NET4: Linux IPX 0.47 for NET4.0
IPX Portions Copyright (c) 1995 Caldera, Inc.
IPX Portions Copyright (c) 2000, 2001 Conectiva, Inc.
NET4: AppleTalk 0.18a for Linux NET4.0
udf: registering filesystem
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
cdrom: open failed.
hdb: irq timeout: status=0xd0 { Busy }
hdb: irq timeout: error=0x00
hdb: DMA disabled
hdb: ATAPI reset complete
UDF-fs DEBUG lowlevel.c:57:udf_get_last_session: XA disk: no,
vol_desc_start=0
UDF-fs DEBUG super.c:1426:udf_read_super: Multi-session=0
UDF-fs DEBUG super.c:415:udf_vrs: Starting at sector 16 (2048 byte sectors)
UDF-fs DEBUG super.c:442:udf_vrs: ISO9660 Primary Volume Descriptor found
UDF-fs DEBUG super.c:439:udf_vrs: ISO9660 Boot Record found
UDF-fs DEBUG super.c:445:udf_vrs: ISO9660 Supplementary Volume
Descriptor found
UDF-fs DEBUG super.c:451:udf_vrs: ISO9660 Volume Descriptor Set
Terminator found
UDF-fs: No VRS found
ISO 9660 Extensions: Microsoft Joliet Level 3
ISO 9660 Extensions: RRIP_1991A
CSLIP: code copyright 1989 Regents of the University of California
PPP generic driver version 2.4.2
PPP BSD Compression module registered
PPP Deflate Compression module registered
voici le log de chargement de X:
Using vt7
(WW) fglrx: No matching Device section for instance (BusID PCI:1:0:1) found
/lib/modules/2.4.21-0.13mdk/kernel/drivers/char/agp/agpgart.o.gz :
init_module :Invalid argument
modprobe : insmod
/lib/modules/2.4.21-0.13mdk/kernel/drivers/char/agp/agpgart.o.gz failed
modprobe : insmod agpgart failed
[drm] failed to load kernel module "agpgart"
(EE) : fglrx(0) : [agp] Unable to acquire AGP, error
(EE) : fglrx(0) "xf86_ENODEV"
Cannot init AGP
le log de modprobe agpgart:
[root@localhost fab]# modprobe agpgart/lib/modules/2.4.21-0.13mdk/kernel/drivers/char/agp/agpgart.o.gz:
init_module: Invalid argument
Hint: insmod errors can be caused by incorrect module parameters,
including invalid IO or IRQ parameters.
You may find more information in syslog or the output from dmesg
modprobe: insmod
/lib/modules/2.4.21-0.13mdk/kernel/drivers/char/agp/agpgart.o.gz failed
modprobe: insmod agpgart failed
J'ai cherche comment configurer le module agpgart sans rien trouver.
S'il ne charge pas, est-ce a cause du chipset de la carte mere KT400?
Merci de votre aide
Fabrice
--------------------------------------------------------------------
Les listes de diffusion occultes: <URL:http://www.CULTe.org/listes/>