(Courriels de diversion: <cedions@dissipait-tritureras.com> <estrades@busards-falsifierai.com> <onduleur@youyous-naîtrons.com> <gobelins@confirmais-industrialisez.com> <tonsure@evolutionniste-vouvoies.com> <raccompagnerons@enquêteuse-terrifiantes.com> <cachous@confectionneuses-etend.com> <justifiaient@travestirent-cloueriez.com> <chaire@paralysa-inculqueront.com> <perfectionnement@controlable-municipalite.com> )
Le Fri, 05 Oct 2001 08:19:24 +0200
[FeelGood] m'a écrit:
>||
>||
>|| > /dev/cdrom /cdrom auto ro,noauto,user,exec 0 0
>|| > /dev/cdrom1 /cdrom1 auto ro,noauto,user,exec 0 0
>||
>||
>|| > /dev/cdrecorder /media/cdrecorder auto ro,noauto,user,exec 0 0
>|| > /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
>||
>||
>|| Tu n'as pas l'impression qu'il y a des choses en double ?
>|| Commances par enlever :
>||
>|| > /dev/cdrom /media/cdrom auto ro,noauto,user,exec 0 0
>||
>|| Et essais de nouveau.
>||
>|| ---
>|| www.feeleas.org
>||
>||
La supression de la ligne :
/dev/cdrom /media/cdrom auto ro,noauto,user,exec 0
du fichier etc/fstab a eu la conséquence suivante : l'attachement de /dev/cdrom
s'effectue en réalité non pas sur le lecteur de CD-Rom mais sur le graveur!!!
Voici mon message de boot :
--------------------
Linux version 2.2.16 (root@linux) (gcc version egcs-2.91.66 19990314/Linux(egcs-1.1.2 release)) #2 Mon Feb 12 21:17:33 CET 2001
Detected 487509 kHz processor.
ide_setup: hdc=ide-scsi
ide_setup: hdd=ide-scsi
Console: colour VGA+ 80x25
Calibrating delay loop... 973.21 BogoMIPS
Memory: 192052k/196608k available (1460k kernel code, 416k reserved, 2268k data,
64k init, 0k bigmem)
Dentry hash table entries: 32768 (order 6, 256k)
Buffer cache hash table entries: 262144 (order 8, 1024k)
Page cache hash table entries: 65536 (order 6, 256k)
VFS: Diskquotas version dquot_6.4.0 initialized
CPU: Intel Celeron (Mendocino) stepping 05
Checking 386/387 coupling... OK, FPU using exception 16 error reporting.
Checking 'hlt' instruction... OK.
POSIX conformance testing by UNIFIX
mtrr: v1.35a (19990819) Richard Gooch (rgooch@atnf.csiro.au)PCI: PCI BIOS revision 2.10 entry at 0xfb450, last bus=1
PCI: Using configuration type 1
PCI: Probing PCI hardware
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Unix domain sockets 1.0 for Linux NET4.0.
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
TCP: Hash tables configured (ehash 262144 bhash 65536)
Initializing RT netlink socket
Starting kswapd v 1.5
Detected PS/2 Mouse Port.
pty: 256 Unix98 ptys configured
Real Time Clock Driver v1.09
RAM disk driver initialized: 16 RAM disks of 64000K size
loop: registered device at major 7
Uniform Multi-Platform E-IDE driver Revision: 6.30
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
PIIX4: IDE controller on PCI bus 00 dev 39
PIIX4: chipset revision 1
PIIX4: not 100% native mode: will probe irqs later
ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:DMA, hdd:DMA
hda: ST313620A, ATA DISK drive
hdb: TOSHIBA CD-ROM XM-6602B, ATAPI CDROM drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: ST313620A, 13033MB w/512kB Cache, CHS=1661/255/63
hdb: ATAPI 40X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.11
Floppy drive(s): fd0 is 1.44M
FDC 0 is a post-1991 82077
LVM version 0.8e by Heinz Mauelshagen (4/1/2000)
lvm -- Driver successfully initialized
md driver 0.36.6 MAX_MD_DEV=4, MAX_REAL=8
linear personality registered
raid0 personality registered
raid1 personality registered
raid5 personality registered
scsi : 0 hosts.
scsi : detected total.
PPP: version 2.3.7 (demand dialling)
TCP compression code copyright 1989 Regents of the University of California
PPP line discipline registered.
Partition check:
hda: hda1 hda2 < hda5 hda6 hda7 hda8 hda9 >
RAMDISK: Compressed image found at block 0
Uncompressing................................done.
VFS: Mounted root (ext2 filesystem).
DC395x (TRM-S1040) SCSI driver 1.27, 2000-05-23
DC395x: Used settings: AdaptID=7
DC395 : Connectors: Termination: Auto Low High
DC395x (TRM-S1040): 1 adapters found
scsi0 : Tekram DC395U/UW/F DC315/U V1.27, 2000-05-23
scsi : 1 host.
DC395x: Target 05: No sync transfers
Vendor: UMAX Model: Astra 1220S Rev: V1.3
Type: Scanner ANSI SCSI revision: 02
DC395x: Target 06: Sync: 100ns Offset 8 (10.0 MB/s)
Vendor: MATSHITA Model: CD-R CW-7502 Rev: 4.16
Type: CD-ROM ANSI SCSI revision: 02
Detected scsi CD-ROM sr0 at scsi0, channel 0, id 6, lun 0
sr0: scsi3-mmc drive: 8x/8x writer xa/form2 cdda tray
usb.c: registered new driver usbdevfs
usb.c: registered new driver hub
VFS: Mounted root (ext2 filesystem) readonly.
change_root: old root has d_count=1
Trying to unmount old root ... okay
Freeing unused kernel memory: 64k freed
Adding Swap: 136512k swap-space (priority -1)
Serial driver version 4.27 with HUB-6 MANY_PORTS MULTIPORT SHARE_IRQ enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
usb-uhci.c: $Revision: 1.232 $ time 21:02:57 Feb 12 2001
usb-uhci.c: High bandwidth mode enabled
usb-uhci.c: Intel USB controller: setting latency timer to 0
usb-uhci.c: USB UHCI at I/O 0xe000, IRQ 11
usb-uhci.c: Detected 2 ports
usb.c: new USB bus registered, assigned bus number 1
usb.c: USB new device connect, assigned device number 1
hub.c: USB hub found
hub.c: 2 ports detected
scsi1 : SCSI host adapter emulation for IDE ATAPI devices
scsi : 2 hosts.
usb.c: USB new device connect, assigned device number 2
usb.c: This device is not recognized by any installed USB driver.
ne2k-pci.c:vpre-1.00e 5/27/99 D. Becker/P. Gortmaker
http://cesdis.gsfc.nasa.gov/linux/drivers/ne2k-pci.html
ne2k-pci.c: PCI NE2000 clone 'RealTek RTL-8029' at I/O 0xe400, IRQ 5.
eth0: RealTek RTL-8029 found at 0xe400, IRQ 5, 00:50:BA:B5:8A:1A.
IPv6 v0.8 for NET4.0
IPv6 over IPv4 tunneling driver
eth0: no IPv6 routers present
eth0: no IPv6 routers present
cdrom: open failed.
VFS: Disk change detected on device sr(11,0)
cdrom: open failed.
VFS: Disk change detected on device sr(11,0)
cdrom: open failed.
VFS: Disk change detected on device sr(11,0)
cdrom: open failed.
VFS: Disk change detected on device sr(11,0)
VFS: Disk change detected on device sr(11,0)
ISO 9660 Extensions: RRIP_1991A
VFS: Disk change detected on device sr(11,0)
ISO 9660 Extensions: Microsoft Joliet Level 1
ISOFS: changing to secondary root
------------------
J'espère que cela donnera des indications à certains pour m'aider !
À bientôt.
Sylvain
---------------------------------------------------------------------
Aide sur la liste: <URL:mailto:linux-31-help@CULTe.org>Le CULTe sur le web: <URL:http://www.CULTe.org/>