<div dir="ltr"><div><div><div><div><div><div><div>Bonjour,<br></div>Je pense que le disk dur est hors service, selon les valeurs ci-dessous.<br><br></div>Ce qui m'embête le plus est de savoir si ce disk dur à reçu un choc !<br></div><div><br></div>Du fait de la valeur Free_Fall_Sensor       qui est: 4<br></div><div>Pourrait-on afirmer qu'il y a eu choc ?<br><br></div>(Arghff 659 heures de vol l'engin seulement !!)<br><br></div><div>j'ai tenté d'installer un nouveau windows et j'ai un message d'erreur <br></div><div>(code erreur: 80800000)<br></div><div><br></div>Je copie le rapport complet ci-dessous <br></div>Merci pour vos retours<br><br></div>Christophe<br><div><div><div><div><div><div><br>smartctl 5.41 2011-06-09 r3365 [x86_64-linux-3.2.0-23-generic] (local build)<br>Copyright (C) 2002-11 by Bruce Allen, <a href="http://smartmontools.sourceforge.net">http://smartmontools.sourceforge.net</a><br><br>=== START OF INFORMATION SECTION ===<br>Model Family:    Seagate Momentus 7200.4<br>Device Model:    ST9500420AS<br>Serial Number:   xxxxxxxxxxxx<br>LU WWN Device Id: 5 000c50 039046ec2<br>Firmware Version: D005SDM1<br>User Capacity:   500,107,862,016 bytes [500 GB]<br>Sector Size:     512 bytes logical/physical<br>Device is:       In smartctl database [for details use: -P show]<br>ATA Version is:  8<br>ATA Standard is: ATA-8-ACS revision 4<br>Local Time is:   Thu Feb 5 14:11:14 2015 UTC<br>SMART support is: Available - device has SMART capability.<br>SMART support is: Enabled<br><br>=== START OF READ SMART DATA SECTION ===<br>SMART overall-health self-assessment test result: PASSED<br><br>General SMART Values:<br>Offline data collection status: (0x82)   Offline data collection activity<br>               was completed without error.<br>               Auto Offline Data Collection: Enabled.<br>Self-test execution status:     ( 121)   The previous self-test completed having<br>               the read element of the test failed.<br>Total time to complete Offline <br>data collection:       (   0) seconds.<br>Offline data collection<br>capabilities:           (0x7b) SMART execute Offline immediate.<br>               Auto Offline data collection on/off support.<br>               Suspend Offline collection upon new<br>               command.<br>               Offline surface scan supported.<br>               Self-test supported.<br>               Conveyance Self-test supported.<br>               Selective Self-test supported.<br>SMART capabilities:           (0x0003)   Saves SMART data before entering<br>               power-saving mode.<br>               Supports SMART auto save timer.<br>Error logging capability:       (0x01)   Error logging supported.<br>               General Purpose Logging supported.<br>Short self-test routine <br>recommended polling time:     (  2) minutes.<br>Extended self-test routine<br>recommended polling time:     ( 108) minutes.<br>Conveyance self-test routine<br>recommended polling time:     (  3) minutes.<br>SCT capabilities:          (0x103f)   SCT Status supported.<br>               SCT Error Recovery Control supported.<br>               SCT Feature Control supported.<br>               SCT Data Table supported.<br><br>SMART Attributes Data Structure revision number: 10<br>Vendor Specific SMART Attributes with Thresholds:<br>ID# ATTRIBUTE_NAME         FLAG    VALUE WORST THRESH TYPE     UPDATED WHEN_FAILED RAW_VALUE<br> 1 Raw_Read_Error_Rate    0x000f  095  078  006   Pre-fail Always      -      214247491<br> 3 Spin_Up_Time           0x0003  100  099  085   Pre-fail Always      -      0<br> 4 Start_Stop_Count       0x0032  100  100  020   Old_age  Always      -      483<br> 5 Reallocated_Sector_Ct  0x0033  054  054  036   Pre-fail Always      -      961<br> 7 Seek_Error_Rate        0x000f  072  060  030   Pre-fail Always      -      14803624<br> 9 Power_On_Hours         0x0032  100  100  000   Old_age  Always      -      659<br> 10 Spin_Retry_Count       0x0013  100  100  097   Pre-fail Always      -      0<br> 12 Power_Cycle_Count      0x0032  100  037  020   Old_age  Always      -      471<br>184 End-to-End_Error       0x0032  100  100  099   Old_age  Always      -      0<br>187 Reported_Uncorrect     0x0032  001  001  000   Old_age  Always      -      24115<br>188 Command_Timeout        0x0032  100  098  000   Old_age  Always      -      12885098502<br>189 High_Fly_Writes        0x003a  100  100  000   Old_age  Always      -      0<br>190 Airflow_Temperature_Cel 0x0022  062  051  045   Old_age  Always      -      38 (Min/Max 34/38)<br>191 G-Sense_Error_Rate     0x0032  100  100  000   Old_age  Always      -      20<br>192 Power-Off_Retract_Count 0x0032  100  100  000   Old_age  Always      -      34<br>193 Load_Cycle_Count       0x0032  090  090  000   Old_age  Always      -      20014<br>194 Temperature_Celsius    0x0022  038  049  000   Old_age  Always      -      38 (0 6 0 0)<br>195 Hardware_ECC_Recovered 0x001a  053  042  000   Old_age  Always      -      214247491<br>197 Current_Pending_Sector 0x0012  100  100  000   Old_age  Always      -      40<br>198 Offline_Uncorrectable  0x0010  100  100  000   Old_age  Offline     -      40<br>199 UDMA_CRC_Error_Count   0x003e  200  200  000   Old_age  Always      -      5<br>240 Head_Flying_Hours      0x0000  100  253  000   Old_age  Offline     -      272979531399662<br>241 Total_LBAs_Written     0x0000  100  253  000   Old_age  Offline     -      3923657144<br>242 Total_LBAs_Read        0x0000  100  253  000   Old_age  Offline     -      1730549053<br>254 Free_Fall_Sensor       0x0032  001  001  000   Old_age  Always      -      4<br><br>SMART Error Log Version: 1<br>ATA Error Count: 24147 (device log contains only the most recent five errors)<br>   CR = Command Register [HEX]<br>   FR = Features Register [HEX]<br>   SC = Sector Count Register [HEX]<br>   SN = Sector Number Register [HEX]<br>   CL = Cylinder Low Register [HEX]<br>   CH = Cylinder High Register [HEX]<br>   DH = Device/Head Register [HEX]<br>   DC = Device Command Register [HEX]<br>   ER = Error register [HEX]<br>   ST = Status register [HEX]<br>Powered_Up_Time is measured from power on, and printed as<br>DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,<br>SS=sec, and sss=millisec. It "wraps" after 49.710 days.<br><br>Error 24147 occurred at disk power-on lifetime: 655 hours (27 days + 7 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC  Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 60 00 00 3f c6 ab 40 00     01:18:18.130 READ FPDMA QUEUED<br> ec 00 00 00 00 00 00 00     01:18:18.068 IDENTIFY DEVICE<br> 00 00 00 00 00 00 00 ff     01:18:17.944 NOP [Abort queued commands]<br> ec 00 00 00 00 00 00 00     01:18:17.881 IDENTIFY DEVICE<br> 00 00 00 00 00 00 00 ff     01:18:17.757 NOP [Abort queued commands]<br><br>Error 24146 occurred at disk power-on lifetime: 655 hours (27 days + 7 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC  Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 60 00 00 3f c6 ab 40 00     01:17:10.524 READ FPDMA QUEUED<br> 60 00 08 6f c6 ab 40 00     01:17:09.937 READ FPDMA QUEUED<br> ec 00 00 00 00 00 00 00     01:17:09.875 IDENTIFY DEVICE<br> 00 00 00 00 00 00 00 ff     01:17:09.751 NOP [Abort queued commands]<br> 61 00 30 0f a1 5d 40 00     01:16:05.129 WRITE FPDMA QUEUED<br><br>Error 24145 occurred at disk power-on lifetime: 655 hours (27 days + 7 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC  Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 60 00 00 3f c6 ab 40 00     01:16:02.144 READ FPDMA QUEUED<br> 60 00 00 3f 7d 07 41 00     01:16:02.118 READ FPDMA QUEUED<br> ec 00 00 00 00 00 00 00     01:16:02.056 IDENTIFY DEVICE<br> 00 00 00 00 00 00 00 ff     01:16:01.932 NOP [Abort queued commands]<br> ec 00 00 00 00 00 00 00     01:16:01.868 IDENTIFY DEVICE<br><br>Error 24144 occurred at disk power-on lifetime: 655 hours (27 days + 7 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 7c c6 ab 00 Error: UNC at LBA = 0x00abc67c = 11257468<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC  Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 60 00 00 3f c6 ab 40 00     01:14:54.157 READ FPDMA QUEUED<br> 60 00 00 3f c4 72 40 00     01:14:54.155 READ FPDMA QUEUED<br> 60 00 00 3f bd 3b 40 00     01:14:54.148 READ FPDMA QUEUED<br> 60 00 00 3f b3 0e 40 00     01:14:54.135 READ FPDMA QUEUED<br> 60 00 00 3f d4 0a 40 00     01:14:54.125 READ FPDMA QUEUED<br><br>Error 24143 occurred at disk power-on lifetime: 655 hours (27 days + 7 hours)<br> When the command that caused the error occurred, the device was active or idle.<br><br> After command completion occurred, registers were:<br> ER ST SC SN CL CH DH<br> -- -- -- -- -- -- --<br> 40 51 00 8f 63 ac 00 Error: UNC at LBA = 0x00ac638f = 11297679<br><br> Commands leading to the command that caused the error were:<br> CR FR SC SN CL CH DH DC  Powered_Up_Time Command/Feature_Name<br> -- -- -- -- -- -- -- -- ---------------- --------------------<br> 60 00 80 7f 63 ac 40 00     01:04:54.206 READ FPDMA QUEUED<br> 61 00 18 ff e7 5e 40 00     01:04:54.197 WRITE FPDMA QUEUED<br> 61 00 00 9f 6f 51 41 00     01:04:54.194 WRITE FPDMA QUEUED<br> 61 00 00 9f 6b 51 41 00     01:04:54.192 WRITE FPDMA QUEUED<br> 61 00 08 4f e4 5b 40 00     01:04:54.163 WRITE FPDMA QUEUED<br><br>SMART Self-test log structure revision number 1<br>Num Test_Description   Status                 Remaining LifeTime(hours) LBA_of_first_error<br># 1 Short offline      Completed: read failure      90%      657        11297679<br># 2 Extended offline   Completed: read failure      90%      657        11297679<br># 3 Extended offline   Completed: read failure      90%      656        11297679<br># 4 Short offline      Completed without error      00%        0        -<br><br>SMART Selective self-test log data structure revision number 1<br> SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS<br>   1       0       0 Not_testing<br>   2       0       0 Not_testing<br>   3       0       0 Not_testing<br>   4       0       0 Not_testing<br>   5       0       0 Not_testing<br>Selective self-test flags (0x0):<br> After scanning selected spans, do NOT read-scan remainder of disk.<br>If Selective self-test is pending on power-up, resume after 0 minute delay.<br clear="all"><div><div><br>-- <br><div class="gmail_signature"><div dir="ltr"><div>Debian Lenny user 2.6.26/Xorg 7.0.2 & KDE 3.5.10<br><a href="http://www.debian.org" target="_blank">http://www.debian.org</a> # <a href="http://fr.wikipedia.org/wiki/Obsolescence" target="_blank">http://fr.wikipedia.org/wiki/Obsolescence</a><br><a href="https://soutien.laquadrature.net/" target="_blank">https://soutien.laquadrature.net/</a><br><a href="http://gnutux.free.fr" target="_blank">http://gnutux.free.fr</a> # Il faut dire GNU/Linux :) # <a href="http://www.culte.org" target="_blank">www.culte.org</a><br>-- <br>GNU/Linux : May the Force be with you !<br><br></div></div></div>
</div></div></div></div></div></div></div></div></div>